1. Injection system The measuring mechanism, which adopts potentiometer detection, along with PLC and PC, can compute and control material entering precisely. With the introduction of the worm gear decelerator, ordinated with the brake motor, the two injectors run at a high speed under the control of converter. Orientation system detects position by utilizing ultrasonic wave linear transducer accurately. 2. Mould clamping system The two-step speed mould opening/clamping mechanism with detection device of full mould opening. Enlargening mould design size can be consistent with varied moulds flexiblely at a high compatibility. 3. Computer-control system The PLC control module works through a graphic display interface to show all monitoring information and setting conditions: material input amount,injection temperature,mould temperature, operation time, output, mould data, etc. all operation processess can be controlled and performed on the touch screen, besides, the operation instructions are easy to be learned.Thanks to the man-machine interface, maintainance and malfunction detection could be easily learned, which will save adjustment time. Multistage code control can be set according to different management hierarchies from operators, maintainance men to managers to avoid man-made negligence but so as to keep production information safe. 4. Hydraulic system (Oil pressure system) By adopting proportional controlling valve, also with the support of computer control system, the hydraulic system can accurately keep control of the flow of multistage pressure and speed. Another three sets of pumps, designed independently, are used to keep down noise but increase efficiency. |
项目ITEM |
| 单位UNIT | LD2002S1-C | LD2002S2-C | 开模 | Mould-opening | | | | 站数 | Work station | 2 | 2 | 2 | 总夹模力 | Clamping force | T | 170 / 200 | 170 / 200 | 热盘尺寸 | Mould-holder Dimension | mm | 290X500X2 / 290X550X2 | 290X500X2 / 290X550X2 | 模具厚度 | Mould height | mm | 100-270 | 100-270 | ******开模行程 | Max. mould opening stroke | mm | 3500模厚(mould thickness)/120mm | 3500模厚(mould thickness)/120mm | 独立控温 | Independent Temperature Control | No. | 4*4 | 4*4 | 热盘加热方式 | Heat way | | 加热器Heater | 加热器Heater | 热盘电热功率 | Heating power | KW | 12.8 | 12.8 | 射枪数量 | Quantity of Injection Gun | No. | 1 | 2 | 入料螺杆直径 | Charging Screw Diameter | mm | 60 / 65 / 70 | 60 / 65 / 70 | ******射出量 | Max. Injection Capacity | cm3 | 905 980 1060 | 905 980 1060 | 入料螺杆转速 | Rotating Speed of Charging Screw | Rpm | 0-260 可调节 adjustable | 0-260 可调节 adjustable | 料管温控区域分布 | | No. | 4 | 4 | 射出压力 | Injection Pressure | Bar/cm2 | 1130 | 1130 | 射出单元电热消耗 | Electric Heating Consumption of Injection Unit | KW | 5.75 | 11.5 | 热盘电热总消耗 | Electric Heating Consumption of Heating Plate | KW | 25.6 | 25.6 | 油压单元马达 | Motor of Hydraulic Pressure Unit | KW | 37 | 18.5 | 总功率消耗 | Total Power Consumption | KW | 53 | 75 | 机械尺寸 | Dimension of Machine | m | 3.5X4.5X2.75 | 3.5X4.5X2.75 | | Weight of Machine | Tonnage | 9 | |
LD2003S1-C | LD2003S2-C | LD2004S2-C | LD2006S2-C | | | | | 3 | 3 | 4 | 6 | 170 / 200 | 170 / 200 | 170 / 200 | 170 / 200 | 290X500X2 / 290X550X2 | 290X500X2 / 290X550X2 | 290X500X2 / 290X550X2 | 290X500X2 / 290X550X2 | 100-270 | 100-270 | 100-270 | 100-270 | 3500模厚(mould thickness)/120mm | 3500模厚(mould thickness)/120mm | 3500模厚(mould thickness)/120mm | 3500模厚(mould thickness)/120mm | 4*4 | 4*4 | 4*4 | 4*4 | 加热器Heater | 加热器Heater | 加热器Heater | 加热器Heater | 12.8 | 12.8 | 12.8 | 12.8 | 1 | 2 | 2 | 2 | 60 / 65 / 70 | 60 / 65 / 70 | 60 / 65 / 70 | 60 / 65 / 70 | 905 980 1060 | 905 980 1060 | 905 980 1060 | 905 980 1060 | 0-260 可调节 adjustable | 0-260 可调节 adjustable | 0-260 可调节 adjustable | 0-260 可调节 adjustable | 4 | 4 | 4 | 4 | 1130 | 1130 | 1130 | 1130 | 5.75 | 11.5 | 11.5 | 11.5 | 38.4 | 38.4 | 51.2 | 76.8 | 37 | 18.5 | 37 | 37 | 67 | 93 | 106 | 143 | 4.4X4.5X2.75 | 4.4X4.5X2.75 | 5.3X4.5X2.75 | 7X4.5X2.73 | | 16 | 19 | 26 |
LD2008S2-C | LD2010S2-C | LD-260-S2 | | | | 8 | 10 | 2 | 170 / 200 | 170 / 200 | 250 | 290X500X2 / 290X550X2 | 290X500X2 / 290X550X2 | 330X600 | 100-270 | 100-270 | 100-270 | 3500模厚(mould thickness)/120mm | 3500模厚(mould thickness)/120mm | 440 | 4*4 | 4*4 | 4*4 | 加热器Heater | 加热器Heater | 加热器Heater | 12.8 | 12.8 | 12.8 | 2 | 2 | 1 | 60 / 65 / 70 | 60 / 65 / 70 | 75 | 905 980 1060 | 905 980 1060 | 1200 | 0-260 可调节 adjustable | 0-260 可调节 adjustable | 0-260 可调节 adjustable | 4 | 4 | 4 | 1130 | 1130 | 1130 | 11.5 | 11.5 | 5.75 | 102.4 | 128 | 32 | 37 | 37 | 37 | 156 | 182 | 53 | 9.2X4.5X2.75 | 12X4.5X2.7 | 3.5X1.5X2.75 | 33 | 38 | 9 |
|
The machine is equipped with two full automatic and high-efficiency injectors, combined with high-performed mould clamping system and PC control system. By using EVA as the raw material, the machine can produce midsole, sole and various kinds of EVA foamin |
|